TL;DR: You can connect 3CX FreePBX to voice AI and AudioCodes Mediant SBC trunks in under 15 minutes without porting DIDs or replacing desk phones by routing ring-group overflow, unanswered extensions, or conditional SIP trunks directly to Kolivri across 8 languages with sub-400ms turn-taking and Memoria 100% LongMemEval memory.

Why Rip-and-Replace Number Porting Stalls Enterprise Voice AI Projects

IT directors and telecom engineers managing 3CX, FreePBX (Asterisk), or AudioCodes Mediant Session Border Controllers (SBCs) frequently delay voice AI adoption because legacy AI vendors demand that the company port its primary business phone numbers away from existing SIP carriers. Number porting introduces multi-week carrier LOA delays, breaks internal extension dialing, disrupts call recording compliance, and risks complete inbound outage if a routing table fails.

When you connect 3CX FreePBX to voice AI using non-intrusive SIP trunking or conditional failover, your existing carrier trunks, IVR trees, and desk phones remain untouched. Human receptionists answer calls normally when available, and Kolivri steps in automatically when the queue is busy, after 15 seconds of no answer, or outside business hours. Before configuring your PBX, you can benchmark your current ring-time and voicemail drop-off using our AI Phone Line Grader.

Three Architectures to Connect 3CX, FreePBX, and AudioCodes to Kolivri

Compare the three zero-downtime integration topologies below to choose the right fit for your telephony environment:

Integration Topology Setup Time Best For Caller ID & SIP Header Behavior Failback / Transfer to Human
1. GSM / Carrier Conditional Forwarding (*61* / *67*) 30 seconds SMB mobile lines, Bezeq/Partner/Cellcom/Pelephone trunks, rapid pilot testing Preserves original caller ANI via standard carrier diversion headers to 054-787-5670 Warm bridge or instant WhatsApp/CRM alert to on-call staff
2. 3CX / FreePBX Ring-Group Overflow Extension 10 minutes Multi-extension offices, clinics, law firms, and service dispatch desks Passes P-Asserted-Identity / Remote-Party-ID and dialed DID over SIP URI SIP REFER or attended transfer back to internal 3CX/FreePBX extension
3. AudioCodes Mediant SBC Peered SIP Trunk (TLS/SRTP) 15 minutes Enterprise contact centers, healthcare networks, and multi-site SIP routing Full custom X-Header injection (department, queue ID, CRM account ID) Bi-directional dial-plan routing with zero hair-pinning latency

Step-by-Step: Connecting 3CX (v18 / v20) via Ring-Group Failover

  1. Retrieve Your Kolivri SIP Endpoint: Log in to https://app.kolivri.co.il and copy your dedicated tenant SIP trunk credentials and inbound URI.
  2. Add a Generic SIP Trunk in 3CX: In the 3CX Management Console under SIP Trunks → Add SIP Trunk, select Generic/Custom, enter the Kolivri SIP registrar host, and enable G.711 A-law (PCMA) and G.711 μ-law (PCMU) with 20ms packetization.
  3. Configure Caller ID Passthrough: Under Outbound Parameters, map P-Asserted-Identity to OriginatorCallerId so Kolivri identifies the true external caller rather than the PBX trunk number.
  4. Set Ring-Group No-Answer Destination: Open your primary Reception Ring Group or Call Queue, set the ring timeout to 15–20 seconds, and set Destination if no answer to route through the Kolivri outbound rule.

Step-by-Step: Connecting FreePBX / Asterisk via Custom PJSIP Trunk

In FreePBX (Connectivity → Trunks → Add SIP (chan_pjsip) Trunk), point the SIP Server to your Kolivri endpoint, set Send RPID/PAI = Yes, and assign the trunk as the Failover Destination on your Inbound Route or Ring Group. For developers automating PBX provisioning or testing live calls directly from their IDE, the Kolivri Voice MCP server (@kolivri/voice-mcp) also generates exact carrier forwarding codes and places test calls programmatically.

Step-by-Step: AudioCodes Mediant SBC Routing with Custom SIP X-Headers

On AudioCodes Mediant VE/CE/800/1000 SBCs, define an IP Group for Kolivri with TLS 1.3 signaling and SRTP media encryption. Use an SBC Message Manipulation Rule to inject X-Kolivri-Department or X-Kolivri-Branch headers based on the dialed DID. Kolivri reads those SIP headers on invite arrival and loads the caller’s cross-call history from Memoria (100% LongMemEval accuracy in English, 98% in Hebrew) across all 8 supported languages.

Connect Your PBX or Mobile Line Today

Start routing unanswered PBX and mobile calls to Kolivri in minutes at https://kolivri.com/start/. Unified plans include Starter at $69/month (₪247, 100 minutes), Business at $139/month (₪479, 220 minutes), and Pro at $249/month (₪880, 450 minutes) with full CRM and PBX interoperability in https://app.kolivri.co.il.

Frequently Asked Questions

Do I need to port my phone numbers away from my carrier to use Kolivri Voice AI?

No. You can keep your existing carrier, DIDs, and PBX extensions intact. Kolivri connects via standard SIP trunking, ring-group overflow, or 30-second GSM/carrier conditional call forwarding (*61* no-answer, *67* busy, *62* unreachable to 054-787-5670) with zero number porting downtime.

How do I connect a 3CX or FreePBX system to Kolivri without changing desk phones?

Create a dedicated SIP trunk or external extension in 3CX or FreePBX pointing to your Kolivri SIP URI from https://app.kolivri.co.il, then add that extension as the final failover target in your ring group or IVR queue after 15–20 seconds of no answer.

Which audio codecs and transport protocols are supported on AudioCodes Mediant SBCs?

Kolivri supports G.711 A-law (PCMA), G.711 μ-law (PCMU), and Opus over UDP/TCP SIP signaling as well as encrypted TLS + SRTP trunks for enterprise AudioCodes Mediant SBC deployments, preserving caller ID (CLIP/P-Asserted-Identity) and custom SIP headers.

Does Kolivri preserve caller memory when transferring calls back to a human PBX extension?

Yes. Every inbound and outbound SIP session is backed by Memoria (100% LongMemEval accuracy across 8 languages). When a call transfers via SIP REFER or warm bridge back to a 3CX or FreePBX agent, Kolivri sends an instant WhatsApp/CRM summary and retains full context starting at $69/month (₪247).

MEMORIA CLOUD & MCP · 500/500 (100.0%) LONGMEMEVAL IN 12.9 MS

Give your AI agents & IDEs deterministic long-term memory with Memoria

Connect Claude Code, Cursor, Windsurf, VS Code, Zed, OpenCode, and custom agents via 30 MCP tools and 8 lifecycle hooks. Start free with 1,000 API calls & memories.

Get Free Memoria API Key →Read Memoria Docs & Benchmarks